When working with any hazardous substances, acids, corrosive, flammable and combustible materials, it is important to maintain equipment and practice well. Here are some things that anyone working with these topics can do to keep the workplace safer for everyone.

Good hygiene practices

1. Always keep the hygiene and hygiene in the workplace.
2. Clean a leak immediately.
3. Clear residue immediately.
4. Dispose of contaminated or unlabeled materials as hazardous waste according to the following protocols.
5. Remove all empty containers from work area immediately.
6. Empty containers may have residues. Do not use them again, even if they are completely clean. Handle these containers as hazardous waste.

Check Your Work Area for Safety

1. Make sure all chemical containers are fully labeled and the hoods are securely closed.
2. Keeping MSDS for all content on site. This will be accessible to all employees.
3. Check to see that & # 39; Warning & # 39; labels are in storage areas of chemicals and acids / corrosive "," open fire "," flammable "and" # 39; flammable & # 39; alarm is correct position.
4. Are the solution loading areas correctly defined?
5. Do not smoke & # 39; area well defined?
6. Is access to hazardous materials controlled?
7. Refractory storage cabinet should NOT be near the end of the road, levels or any areas that would delay departure.
8. Do not store any storage cabinet on the wall without specially designed for this purpose and have appropriate accessories.
9. Do not locate a flammable cabinet near direct heat source, open flame or direct sunlight.
10. Flammable and corrosive / acidic cabinets must be attached to prevent ingredients.
11. Is the security fridge maintained and containers often checked for leakage, etc.?
12. Are materials appropriately stored for their incompatibilities?

Chemical Disposal Procedures

1. Dispose of hazardous waste as hazardous waste, according to manufacturer's instructions and facilities.
2. Never pour any corrosive substances or other substances into the drain. This can contaminate the stormwater system.
3. Storage in hazardous waste shall be clearly identified.

Learn How to Treat Emergency Issues

1. Know your emergency procedures for the first time, such as using a sewage pump or full shower.
2. Is a first aid kit available? What is their location?
3. Are emergency numbers available or posted?
4. Get acquainted with cleaning and cleaning equipment.
5. Know the location of fire extinguishers and how to use them.
6. Review an emergency safety plan or other incident.

Protect Your Security

1. Use the appropriate PPE when necessary.
2. Do not smoke, drink, eat anywhere near a chemical or workplace.
3. Do not touch your face or body while on or after working with chemicals until you wash your hands thoroughly.
4. Wash your hands; Remove contaminated clothing before leaving the workplace.

Security Staff Maintenance

1. Be sure that the maintenance staff knows the hazards of materials in their workplace.
2. Make sure that your maintenance team knows special precautions and procedures before starting work.
3. Make sure this person knows how to use PPE.
4. Check to see that the processing material is used appropriately and when necessary.

A safe working environment is essential, and it requires everyone to know the rules and work together.

Source by Andy Clark